AT Pro Headphone Adapter Question

[HighPlainsHunter]

I tried using the AT headphone adapter, and some Koss QZ-99 headphones, but the speaker would not cut out, and I didn't get anything through the headphones. Any ideas?

Forgot to add that I tried a different pair of headphones with the same result.

Thanks,
HighPlainsHunter

 

[jim tn]

Like the coil connection, make sure the adapter connection is seated snuggly as well as the head phone plug. The first adapter I had when getting the A T started cutting out shortly after getting the A T. Wiggled, jiggled it and it continued to cut out off and on. Sent an email to customer service and they promptly sent me a new one and have had no problems since. I do now have a back up one, though.

 

[William-NM]

You just need to add an inline volume control. Pick one up at Radio Shack, etc.

 

[HighPlainsHunter]

Like the coil connection, make sure the adapter connection is seated snuggly as well as the head phone plug. The first adapter I had when getting the A T started cutting out shortly after getting the A T. Wiggled, jiggled it and it continued to cut out off and on. Sent an email to customer service and they promptly sent me a new one and have had no problems since. I do now have a back up one, though.

That was it Jim. Pilot error. I just disconnected, and re-connected the adapter and problem solved.

I should have tried that before posting. Hopefully, it might help someone else.

Thanks again,
HighPlainsHunter