Hi to all. I have a small collection of Garret detectors.
I recently acquired a Freedom 1 Coin Commander and a Freedom 3 Coin Commander. The Freedom 1 came with both 11" and 7" coils. The Freedom 3 Coin Commander came with a 4" coil. All work great EXCEPT for the 7" coil. It came with a broken connector. It is a Deepseeker 5.5.
Using an ohm meter on all the coils, the 7" one apears to have an open winding. The other coils have continunity on 2 pairs of pins. The 7" coil which is not working, only has contunity for one coil.
I was sure the cable just above the coil had a broken wire, but I got to the cable below the top of the coil and it's OK. Maybe it's just nor compatable? I sure would like to get a coil schematic.
Any ideas?
Anyone know where to get these oddball 5 pin connectors?
I plan on contacting Garrett but thought I'd try here, also.
thanks!
ron
I recently acquired a Freedom 1 Coin Commander and a Freedom 3 Coin Commander. The Freedom 1 came with both 11" and 7" coils. The Freedom 3 Coin Commander came with a 4" coil. All work great EXCEPT for the 7" coil. It came with a broken connector. It is a Deepseeker 5.5.
Using an ohm meter on all the coils, the 7" one apears to have an open winding. The other coils have continunity on 2 pairs of pins. The 7" coil which is not working, only has contunity for one coil.
I was sure the cable just above the coil had a broken wire, but I got to the cable below the top of the coil and it's OK. Maybe it's just nor compatable? I sure would like to get a coil schematic.
Any ideas?
Anyone know where to get these oddball 5 pin connectors?
I plan on contacting Garrett but thought I'd try here, also.
thanks!
ron