Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Answering some of your questions

A

Anonymous

Guest
I have been toying with a DD coil for the CZ. The ID accuracy is unstable & inconsistent no matter what efforts are 'tweaked' into the coil (or front-end). For the techno's, it is in the demodulator circuits as to why the CZ platform cannot accept this DD configuration. The CZ does not lend itself very well to a adjustable/alterable platform.
The "relic" icon on the CZ-70 vs. the "relic" icon on the CZ-3D are not the same. First, the tones are different. Secondly, the conductive bandwidth for the "relic" icon on the CZ-70 is a bit lower (conductively) and more broad (wider bandwidth). On the CZ-3D, the "relic" icon is much less apt to be a soda-tab.
Yes, the CZ-3D can hunt modern (trashy) parks with minimal problems,,,, but you may choose to run the unit in the 'Salt' mode if you are new to the CZ series units,,,, (disabling the old-coins 'enhance' mode),,,, and circumvent the recovery of a few extra aluminum trash items...... or you may choose to run the unit in the 'enhance' mode and not recover the surface hi-tones, which, in turn makes it much less likely that you will miss the older generation coins at the greater depths.
The CZ-3D in the Salt mode or in the Enhance mode produces all 4 tones.
The depth meter goes to 8" on the analog CZ's. The unit can detect deeper than 8" in most soils. And under certain circumstances, the CZ series detectors will detect a target in the ID mode at greater depths then it will pin-point the same target. If you detect a deep/weak repeatable signal in the ID mode, but no audio in the pin-point mode, there is a good probability you have a deep target.
A specifically unique feature about the CZ-3D is the fact that it will ID spherical, conical, cylindrical and round targets with a high tone to greater propensity as compared to other units (and CZ's). On the flip-side,,,, the CZ-3D will ID jagged pieces of metal to greater propensity with a mid-tone. Certainly not perfect or foolproof,,,, but increased performance. This was one of the two 'secrets' that MANY of you (especially experienced CZ users) discovered in short order. My appreciation for your reporting of this discovery as each of you independently discovered this attribute. My intent was NOT to 'keep secrets/information' from you; but rather, help aid me in R&D concepts,,,, and justify/quantify engineering efforts.
Due to marketing and demographics, the CZ-3D was kept at a more affordable price by NOT making it rainproof (aka CZ-6a). For just $100 more, we (FRL) could have made it rainproof,,,, but it would have kept a uncanny proportion of the populous from purchase acquisition. I wanted more people to be able to afford & enjoy this platform. And for $1, you can simply put a shower cap or plastic bag over the control housing and punch your headphone jack through the plastic bag (helps hold the rain cover in place) and virtually have the same amount of weather protection.
For those of you 6 lucky ones of whom have recently found gold coins,,,,, THANKYOU for sending a e-mail (some w/photo's).... I must share your stats with others. First, all 6 coins were $5.00 Half-Eagles. Second -- All six of you found the gold coins during the 4th week of March (ironic). Third -- all of you choose to remain 'anonymous' (ironic again). Your names are in strictest confidentiality. Fourth -- one of the Half-Eagles were found with a Explorer II, yet the person owned a CZ-3D..... and the other five gold coins were found with a CZ-3D. Fifthly, of the 6 coins,,,, five of them were Indian Half-Eagles and the other, a Coronet type. I would have expected these numbers to be reversed. Four coins were East-Coast, one was Mid-West and the other was South-West U.S. Congratulations to all six of you! Two of you sold your CZ-70's. Why? Keep it as a inclement weather machine, trashy park machine and/or (at minimum) a back-up unit. Keep in mind, the CZ-70 is a 'primary' machine for many.
Happy Intelligent Hunting
Thomas J. Dankowski
 
I feel Tom did answer a lot of questions frequently asked by many. Surprising how the differences are relatives to tones and size of segments are confused by many when comparing the CZ3D and CZ70 pro...
As far as gold coins go either will find a gold coin and many that dig a lot of offbeat signals or for that matter hunt old areas and dig all just luck out as most gold coins just don't fall in areas that a coin hunter would dig.
Which unit you use is strictly your call and many swear by both.
I am E-mailed similiar questions from time to time and certainly the ones he mentioned are frequent.
I did learn one thing myself as I always asked why did they do away with the CZ6A and it appears they were cost prohibitive.
In any case its nice to see Tom appear on the forum as he has been absent for a bit.
Have any particuiar questions of your own fire away, lots of knowlegeable forum members and perhaps something hard will turn out to be easy.
Fisher gives us the choice of two CZ's now in production and many can argue either way so grab your favorite CZ. Heck neither one is my favorite and many say the CZ6A was the best made, myself like the rod mount only CZ7A as it is better balanced and just love the 80-90 hrs I get on the batteries while still having a CZ in my hard that has similiar characteristics to the newest CZ's.
For Tom to answer all the questions that are asked frequently he could probably write a book.
 
I bought a CZ-3D a year ago based on your posts and many others on here. I have been very happy with the machine and have found quite a few old coins. It fits my type of detecting because I spend most of my time at old homesites. Thanks Tom.
Dave
 
Top