Mike K (Ohio)
Active member
Does anyone know where I can download this program? Just got a 3030 yesterday and I'm coming from an E-Trac... Thanks In Advance
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Andy Sabisch Coin Program
- Thread starter Mike K (Ohio)
- Start date
Mike K (Ohio)
Active member
I didn't know if it came with settings etc etc... I bought the Andy S book on the CTX and showed a picture so I made one.. Just wasn't sure if anyone could tell me if it came with settings already set? Thanks and sorry to here about your break down that never is any fun.... Thanks for taking the time to reply....
Mike K
Mike K
mrwilburino
Member
There are a few vids on YouTube that explain how to set it up.
LawrencetheMDer
Active member
There are something like 7 canned programs with the CTX 3030 and you can take-off as soon as you charge the battery.
Mike K (Ohio)
Active member
LawrencetheMDer said:
What's that? Don't understand
Mike,
Are you getting a new or used CTX?
In either case, you desperately need to download the manual and print it out.
Coming from the ET will help tremendously, but don't get caught in the trap of thinking the CTX is just an enhanced E-trac.
(It has similarities, but they have different 'DNA'.)
As far as the 'canned' programs go...if you're getting a used machine, you can do a complete reset of the CTX back to factory defaults.
Which is what I would do immediately with any used machine.
You can access the quick reset menu by powering on, then continuing to hold the power on button past the jingle tone until you hear a low tone.
Choose the option "Reset All", and your detector will be setup as factory new.
Once again, that manual is invaluable, as is the Sabisch book.
Welcome aboard, and good luck,
mike
Are you getting a new or used CTX?
In either case, you desperately need to download the manual and print it out.
Coming from the ET will help tremendously, but don't get caught in the trap of thinking the CTX is just an enhanced E-trac.
(It has similarities, but they have different 'DNA'.)
As far as the 'canned' programs go...if you're getting a used machine, you can do a complete reset of the CTX back to factory defaults.
Which is what I would do immediately with any used machine.
You can access the quick reset menu by powering on, then continuing to hold the power on button past the jingle tone until you hear a low tone.
Choose the option "Reset All", and your detector will be setup as factory new.
Once again, that manual is invaluable, as is the Sabisch book.
Welcome aboard, and good luck,
mike