All Metal mode and eagle eye depth multiplier ,HELP REQUEST

[ehsan_aman]

I came back from hunting today, I have been 3 days in jungle , for treasure hunting.

My Garret GtI 2500 , could not help me as I expect.It is very sensetive to mineralized soil. only descriminate mode doing trustfull , Its All Metal Mode is not trustfull, It is alerting over some area of soils that they are more mineralized than other. I digg some holes at deep of 1 metere , according to All Metal signals , but I found nothing and signals continue yet.dicriminate mode in a sensitivity of 8 and upper (sensitivity degree on GTI) detemined somthing , and I dig , I found a little bottle cap.in another Place it determined somthing at the size of BIGGER THAN CAN but it doesnt determined the depth. we dig about 1.5 meter and it continue determining somthing at the same size (albeit 3 different size it showed : Bigger than coin, can , bigger than can ) , but It couldnt detemine the depth.we stop digging because , I think that the GTI can determine things in 80 Cm and we digg 1.5 meter and it continue detemining , I gues it sense a mineral soil instead of true metals.

our eagle eye depth multiplier , did not help us , at all. it was very very sensetive , and alert us in many locations were be 1 meter far from each other.I guess I dont know how to work with it.

Please help me to work with all metal , and , eagle eye depth

thank you

 

[DavHut]

Ehsan,
There is a much to know in this activity. First is to take it slow and learn what yor machine "thinks" is under your feet.

Mineralized ground can cause a lot of trouble and can really fool a detector.

Just keep working with it and it will come.

 

[Uncle Willy]

Ehsan,
Have you read all the instructions more than once and do you understand them? You have to practice with and learn your machine before you can undertake any major searches. You can't just take it out of the box and go out and find treasure. You must learn what it is telling you and why. It has a language all its own that you must learn before you can master it. Detecting with a machine like the 2500 is not easy until you learn how to use it. Practice on something simple until you get some idea how your detector works.

Bill

 

[ehsan_aman]

hi
thank you David and uncle willy .
I read all instructions but I think your are right I need to practice more and more.but as you know we can practice with it at the public because its forbidden.
anyway , I try to practice and learn to speak to it and listen him just like a friend. I bleive in USA products.
thank you my friends

 

[Mike T]

Ehsan, welcome to you. What country do you come from? do you have problems with the manual because it is in English? I do not Know the 2500 but alot of people here do and they will help you.
your new friend, Mike T

 

[Uncle Willy]

Keep us posted bud and good luck on your project. Learn that machine well and it will perform for you. We all started the same way - dumb as a brick, but we persevered and practice and patience won out. It will for you also.

Bill

 

[ehsan_aman]

hi
thank you Mike
No my problem is not with English , I know Englih as enough as I need to understandthe instructions, my problem is with all metal mode , it doesnt work correctly. it receives strong signals from the ground some where that no metal is under the ground , I cant distinguish this status from the real status which it detects metals. we digged at least 1.80 meter according our detectors signals but we found nothing , but the detector receives signals yet. I think it is sensitive to mineralized ground and do not perform correctly.
If you can help me with this mode (all metal) , especially with eagle eye depth multipier.in fact my eagle eye do not work, it cannot pinpoint for me . it just alarm everywhere.
thank you , all of you my friends

 

[DavHut]

Alot of iron in the soil could also cause this problem. Is it possible thet there is alot of diffuse iron trash present?