A question to all...

[robert roy]

I notice the metal kack on the coil is sticking when I try disconnecting it from the control box to change coils.
Sometimes it a real struggle. I wonder if anything like a graphite or what would help.
Any suggestions appreciated.
Robert Roy

 

[Horsesoldier]

WD-40 is electronic friendly and water repellent. I know this may sound strain but I coat my entire machine with it. Especially the coil. It helps keep everything plyable and dust and dirt easily wipes off. Hope this helps.

 

[robert roy]

That may not be a bad idea. As long as the detector id OFF the spray will dry
for sure. I'll see what others have to say as well.
Robert Roy

 

[Rob (IL)]

WHITES SAYS WD-40 IS A NO NO. Here's what it says in the MXT manual. Rob

V. Additional Precautions
A. Avoid dropping your detector while attempt
ing to set it down to dig.
B. Avoid using your detector for leverage when
standing up from a dig.
C. Do not use any lubricants, such as WD-40,
on any part of your detector.
D. Do not modify your instrument during its
warranty period.

 

[Groundshaker]

Hmmm, a repellent. Never knew that.I learned something today. I knew that WD-40 was a moisture displacent,and is great for removing moisture from electronics (like a water soaked distributor caps) But i didn't know that it had lasting effects.

 

[Horsesoldier]

I didn't mean that you spray it directly on the components. Spray it on a rag and then wipe everything down with it. That's interesting about the manual. I though that pertained to the O-rings and gaskets and stuff like that. They also tell you not to use diver's silicone on the O-rings on the Surfmaster but I've never had any problems. Maybe it breaks down the chemical somehow. Oh well, thanks for the info.

 

[robert roy]

Thanks everyone. Looks like I'll just have to live with it.
I tell you, sometimes it's a real bear to pull the dang thing out.
And yes I always unscew the lock. Can't believe someone
told be I need to do that first. DUH!!!
Robert R

 

[porkey]

'' Radio Shake'' electric contact cleaner, cleans, lubs and is safe.

 

[robert roy]

Thanks. I'll look into it.
Robet R

 

[badboy]

I use a little lemon oil on mine and cleans up the machine real nice. I learned this trick from hearing not to use Armorall on your dash of your car etc. saying use lemon oil its safer, then I wipe it all off. Never had a problem