kaolinwasher
Well-known member
[size=large]Got out today with a new setting I like , some like to crank things up to get max depth, but it does not always give the best effect, I used a mellow , laid back backed off setting , and still got good depth three things on the Mirage will boost the depth, 1- high gain , 2 lower pulse delay- 3 faster tick on the threshold, I toned them all back as you can see i dug the good the badd & the ugly but not much foil or small Iron & the small Iron was near suface, I was surprised how deep some of the tabs where, i was getting them in the 4 to 6" range, I also swept it in the mineralized gravel and the machine was so quite i had to sweep my shoe to make shire it was on , then i hit that dime , I just love this machine , but the machine like to mock me when i find Iron , HA HA no thats the interference , - all you have to do is move the frequency knob and it shuts up just made the video to show how it sounds & performs in real world I filmed all targets as i dug about 50/50 iron non iron nothing seemed to be masked today but i was not digging any foils exempt a few thicker ones and all the small Iron was shallow [video]https://www.youtube.com/watch?v=XgUyy-8Q7L4&feature=youtu.be[/video][/size]