I noticed that my headphones would cut out when I was over a target. It also does it with the wireless module so I dont dont think its the headphones or wireless module. It has to be something in the wireless frequencey thats transmitted from the detector. Has anyone ever had this problem? I have also tried shifting the wireless frequencey. Also the audio will completly stop when im about 5 foot away. I dont use the headphones anymore.

I also did a factory reset a few times.
Any help would be greatly appeciated

The only time I ever had this happen was when the HPs were "backward". Always keep the green light side on the detector side.

Update: I was looking at this problem today and noticed it would cut out when I started to move the cable around close to where it plugs into the control box. Thought it could be a broken wire but knowing this is a well made unit (built like a tank) so I quickly decided it wasnt the cable so started monkeying around the screw in connector. started to move the connector around and it would start to cut out again. So I unhooked the cable and sprayed the male and female pin connectors with electronics cleaner and dabbed some dielectric grease on the male connector and slide it in and tighted it as far as I can get it (finger tight). Problem solved. always try the simple things first