Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.
Equinox 800 on silver
- Thread starter Kiwi
- Start date
silvercoinboy
Well-known member
Not normally. The mix of frees helps to get greater depth in various conditions. I would not use the gold program as that skews frees towards low conductors
Picketwire
Well-known member
From Equinox 800 manual:
Using a single frequency may have a slight advantage over multi- frequency in certain detecting situations.
For example; if you were searching only for larger high conductive targets located at great depth, using 5 kHz may give an advantage. Similarly, if you were hunting only for very fine gold jewellery at a shallow depth, then 20 kHz* or 40 kHz* may give better results in some detecting environments, such as at a beach on the dry sand.
Only way to know for sure is to try it in your search conditions.
Using a single frequency may have a slight advantage over multi- frequency in certain detecting situations.
For example; if you were searching only for larger high conductive targets located at great depth, using 5 kHz may give an advantage. Similarly, if you were hunting only for very fine gold jewellery at a shallow depth, then 20 kHz* or 40 kHz* may give better results in some detecting environments, such as at a beach on the dry sand.
Only way to know for sure is to try it in your search conditions.
fwcrawford
Well-known member
It may be worth a try also if you are dealing with EMI and have to lower the sensitivity in Multi frequency… you may be able to run a higher sensitivity setting in 5khz, although I have found that in this situation switching to a higher single frequency seems to give better results when around EMI.
Ohio pull tabs
Well-known member
I run in 15 a lot
professor-tones
Well-known member
Slightly better response in multi . A definite silver magnet is the 800.
